Description
Datasheet Since MB90F387 is acting as a master. Therefore, EEPROM should receive the clock from MCU. This is done by sending a dummy byte 0x00 to EEPROM. This. On MB90F387 /F387S/387/387S, an image from FF4000H to FFFFFFH is viewed on 00 bank and an image of. FE0000H to FF3FFFH is viewed only on FF bank. MB90F387 /S,MB90F455/S,MB90F456/S,MB90F457/S,MB90F897/S. Set P30 and P31 to L . MB90F804. When the original oscillation is 4 MHz, set P65 and P66 Jun 27, 2005 Qty. Specification. Remarks. 1 Board. 1 Evaluation board equipped with Fujitsu F2MC-16LX Series. MB90F387 Microcomputer. See Figure 1.1. DTP/External. Interruption. 16-bit Reload. Timer (2 ch). IN0 to IN3. PPG0 to PPG3. RX. TX. INT4 to 7. TIN0,TIN1. TOT0,TOT1. Internal Data Bus. MB90F387 /387.
Part Number | MB90F387 |
Brand | Fujitsu |
Image |
MB90F387
FUJT
109
0.23
Fossion International
MB90F387
FUJITUS
52
0.6325
Shenzhenshi Zhongyiyingtong Technology Co.,Ltd
MB90F387
FUJLTSU
185
1.035
SDES LIMITED
MB90F345CESPF-GE1
FUJI
80
1.4375
Daejon Electronics
MB90F347DSPF-G
FUJITSU
16
1.84
Ramos S.R.L.